Quick fault guide

Please click on the button if you are able to contribute a solution to this list or would like to add to, or update PALsite's information on this model. Please note, questions will be removed.

If you have a question about this model, please raise it on the chatpage.

Fault	Solution
No power, intermittent startup, or flickering indicators	Check for dried out electrolytic capacitors. Also check thebattery terminals to see if they are corroded. The voltage regulators on this camera are also prone to fail.
Blurry image, poor low-light performance, or no video output	Firstly make sure the lens is clean and also any internal optics. Check the CCD output on a scope. Also reflow solder joints on the video amp board.
No image in viewfinder, distorted display, or flickering	Possible failed CRT module, check also for loose ribbon cables, or bad capacitors.
Submit entry