BVW-40 | ||
Video |
Bandwidth (50% Modulation)
Luminance: 25Hz to 4.0MHz +0.5/-6.0dB Chrominace: 25 to 1.5MHz +0.5/-3.0dB S/N Ratio
Y/C Delay: < 20ns Signal Inputs Composite Video Input:BNC 1.0Vp-p, 75Ω, unbalanced sync negative DUB/Component Input: 12-pin male connetor Reference Input: BNC 1.0Vp-p, 75Ω, unbalanced sync negativeSignal Outputs Video Output 1, 2: BNC 1.0Vp-p, 75Ω, unbalanced sync negative DUB/Component Output: 12-pin female connetor DUB (U-matic) Output: 7-pin female connector |
Audio |
Audio Performance with Metal partice Tape
Frequency Response: 50Hz to 15kHz ±3.0dB
S/N Ratio: Distortion (at 1kHz) at operational level (+4dBu): |
Signal Outputs Audio Line Output CH-1/2: XLR, 3-pin male. +4dBu, 600Ω balanced Audio Monitor Output: XLR, 3-pin male. Headphones: Stereo Jack Time Code Output: BNC
2.2Vp-p, 600Ω, unbalanced Signal Inputs Audio Line Input CH-1/2: XLR, 3-pin male. +4dBu, 600Ω balanced Time Code Input: BNC
0.5-18Vp-p, 3kΩ, unbalanced
|
General |
Power requirements: AC 90 to 265V, 48 to 64Hz
Power Consumption: 280W Operating Temperature: Storage Temperature: Humidity: Less then 80% (relative humidity) Mass: 38.7kg (85 lb 5 oz) Tape Speed: 101.5mm/s Playback time: 20 minutes maximun with BCT-20K Fast forward/Rewind time: Less than 90 seconds with BCT-20K Search speed
Dimensions: Approx 427mm (W) x 264mm (H) X 550mm (D)
|
Other |
Remote IN/OUT: 9-pin female D connector RS-422
Remote IN/OUT: 36-pin female D connector RS-422 TBC Remote: 15-pin male D connector Processor adjustment range:
Supplies Accessories AC Power Cord, Operation manual, Remote control cable RCC-5G (9-pin), 12-pin dubbing cable, extension boards A, B & C. |